Ways To Extend The Life Of The Motor

If you want to prolong the life of the purchased motor, you should take the following methods in daily operation to achieve the goal.

1. Daily cleaning

When the motor is in use, it is easy to enter dust and other powders. Although these dusts have no effect on the coil, they still have a certain impact on the bearings above, and there will be situations such as jamming. Therefore, it should be cleaned up in time after use, so as to prevent the sundries entering from the hood from staying on it for a long time, thereby reducing the overheating caused by the poor heat dissipation of the items, and prolonging the life of the items.

Ways To Extend The Life Of The Motor

Request A Quote

2. Do a good job of waterproofing

The selection of waterproof devices for different motors will also be different. Many manufacturers use waterproof breathable membranes or waterproof breathable valves to waterproof them. However, users should not be careless when using or cleaning on weekdays, and also do a good job of waterproofing and moisture-proofing. Nowadays, there are many kinds of products on the market, so it is more necessary for users to choose products with good waterproof performance when choosing to buy.

3. Prevent high temperature exposure

Exposure to the sun at high temperature is very harmful to the motor. It will not only accelerate the aging of its components, but also if the motor is exposed to strong light for a long time, the color of the exterior will change, and it will even cause the efficiency of operation. decline and affect lifespan. Therefore, new items purchased should be placed in a place that is not directly exposed to the sun, thereby effectively prolonging their lifespan.

With the increasing development of society and the continuous advancement of technology, there will be more and more uses of motors. Therefore, users should pay attention to waterproof and moisture-proof work when using items, especially when cleaning them at ordinary times. Do not let water enter the inside of the item, so as not to damage the internal parts of the item. And pay attention to put it in a cool place to avoid exposure to high temperature, so as to prolong its life.


Post time: 2022-02-22
  • Previous:
  • Next:
  • Tags:

  • Write your message here and send it to us
    Related Posts
    • The Main Noise Source Of The Motor
      The Main Noise Source Of The Motor

      Noise is a combination of cluttered sounds of various frequencies and intensities, and the nuisances of this nuisance sound to humans are well known. Noise often accompanies vibration, and excessive vibration can damage other equipment. The level of vibration and noise reflects the level of product design and manufacturing, and is an important indicator to …

    • Energy Efficiency Standards for Electric Motors
      Energy Efficiency Standards for Electric Motors

      At present, the countries that formulate motor efficiency standards internationally include the United States, Canada, Mexico, Brazil, Australia and New Zealand. my country has promulgated the energy efficiency standards for electric motors at the beginning of this year, and will be officially implemented on August 1, 2002. Regarding the EU-wide European Motor and Power Electronics …

    • Disassembly And Assembly Of Three-phase AC Asynchronous Motor
      Disassembly And Assembly Of Three-phase AC Asynchronous Motor

      1. Disassemble the asynchronous motor (1) Before disassembling the motor, the connection between the motor and the external electrical connection must be removed, and the phase marks must be made. (2) Disassembly steps a, pulley or coupling; b, front bearing cover; c, front end cover; d, fan cover; e, fan; f, rear bearing cover; g, …

    • Comparison Of Soft Start And Traditional Decompression Start Methods
      Comparison Of Soft Start And Traditional Decompression Start Methods

      The traditional decompression starting methods of cage motors include star-delta starting, auto-coupling decompression starting, reactor starting, etc. These start-up methods are all hard-starts with stepped decompression, and have obvious disadvantages, that is, secondary inrush current occurs during the start-up process. The difference between soft start and traditional decompression start is as follows. 1.1 No inrush …

    • Correct Wiring Of Three-phase Asynchronous Motor
      Correct Wiring Of Three-phase Asynchronous Motor

      Most electricians know that the three-phase stator windings of a three-phase motor have two leads for each phase winding. One end is called the head end, and the other end is called the end. It is stipulated that the head end of the first phase winding is represented by D1 and the end is represented …

    • The Structure Of The Three-phase Asynchronous Motor
      The Structure Of The Three-phase Asynchronous Motor

      To put it simply, the three-phase asynchronous motor is mainly composed of two parts: the stator and the rotor, and the air gap between the stator and the rotor is generally 0.25~2mm, because the air gap is also a part of the magnetic circuit of the motor. When the air gap is large, the reluctance …

    • Ways To Extend The Life Of The Motor
      Ways To Extend The Life Of The Motor

      If you want to prolong the life of the purchased motor, you should take the following methods in daily operation to achieve the goal. 1. Daily cleaning When the motor is in use, it is easy to enter dust and other powders. Although these dusts have no effect on the coil, they still have a …